电水壶坏了不要傻傻扔掉,学会这两招,帮你省钱

时间:2019-07-13 来源:www.brianwaves.com

888真人在线赌场

大家好,我是一头大猪蹄,我将继续用一个小小的妙招来改变我的生活。

曾经有一个

一个不加热但不发光的电热水壶放在我面前

我没有保存

失去之后我不会后悔的。

因为我后来才知道它可能并不坏

如果上帝能给我一个再来的机会

我会检查电热水壶底座

ed575fead0054bebb9066be56ee9d85b

所以说

电热水壶不能煮沸,底座上的灯不亮。

不一定不好喔

这可能是由以下两个原因引起的

首先,基座进入水中,导致短路。

其次,长期使用电热水壶后,底座铜片积聚了污垢,阻碍了电路。

我已经知道原因了,怎么解决呢?

首先,要注意一点

处理前请拔掉电热水壶。

处理过程中避免电击

有时,当电水壶连接到水时,我们不小心让底座接触到水。当基础水箱进入水中时,会导致短路,这也是在家中旅行的原因。

然后,在底座水箱装满水后,应取下水壶,用吹风机吹干底座,然后插上电源。

221a244840004411bf92d60277913778

同时,热水器接水时应注意水壶中的水位,不要超过水壶中标注的最高水位。

If it exceeds, on the one hand, after the water is boiled, the water level will overflow and the base will be wet; on the other hand, because the water in the pot is too much, the pressure on the base copper will increase, and the kettle will be taken off. After that, the copper piece will not bounce up and cannot be connected to the metal ring at the bottom of the pot.

adf29ddd818f4622b66ecb6173b2c00d

After long-term use of the electric kettle, the copper on the base will inevitably accumulate some dust or other dirt, especially when the kettle leaves the base, and the electric kettle will be exposed for a long time.

When the dirt is accumulated to a certain extent, it will affect the copper piece of the base and the metal ring at the bottom of the hot water bottle, so that the electric kettle can not be boiled, and the lamp of the base is not bright due to poor contact.

679d6956aa1647078325e54ef4f5cfc0

The method of processing is also very simple, divided into two steps:

Step 1 Preparation Tools

Prepare a toothpick and some paper towels, wrap the paper towel on one end of the toothpick, the thickness is moderate, and the length should be consistent with the height of the base copper groove to facilitate cleaning.

Step 2 Wipe the copper sheet

Insert the toothpick with the paper towel into the copper piece of the base and wipe it around the metal ring. Note that the force should be grasped during the wiping process. Do not press the two copper pieces in the base. The copper piece cannot be pressed under pressure. The metal ring to the bottom of the kettle can't be heated.

After wiping the base copper, we have to check if the two copper pieces in the base are in the bed. If it is pressed down, we can use the toothpick to pick up a little.

If you have alcohol at home, you can also wipe a little alcohol after the toothpick is wrapped, then after the above operation, wait for the alcohol to evaporate, you can plug in the electricity to check whether the kettle can boil water.

Have you learned it? Remember to pay attention and let you know more about life.

alert! 7 easy to carcinogenic cooking habits, how many do you account for?

xx夏季食物快速放入冰箱和电力?这就是为什么你没找到正确的方法

如何清洁这些家具,轻松学习这些技巧!